- 16 -
6-6. Power cable connection
Connect the attached AC adapter to the DC INPUT terminal on the back of the machine and
the power plug to the power socket on wall.
7. Power-on Notice
When the power is on, the last volume will appear. So, please make sure the volume
value is suitable when using the headphone.
When the power is on, the audio signal will be on immediately. When the position of
volume is not suitable, it’s possible that the volume may become too loud.
In this case, it may cause too big burden to the ears, and it is extremely dangerous.
Besides, the headphone and the speaker may become out of order.
Please avoid performing following actions within 1 second after the USB cable is
connected because the environment may cause pop noise and damage to the
headphone and the machine.
POWER OFF
→
Remove USB Cable
→
Insert USB cable
→
POWER ON
Performing the above actions, the interval between power OFF and ON should be 10
seconds.
