7. MDBCoinDisable
GUI command
Command
Parameters/Comments
MDBCoinDisable
[none]
RASPIVEND daemon answer
Answer
Parameters/Comments
{"MDBCoinDisable":"success"}
or
{"MDBCoinDisable":"failed"}
This command will disable the attached MDB coin
acceptor/changer.
8. MDBBillSettings
GUI command
Command
Parameters/Comments
MDBBillSettings
[none]
RASPIVEND daemon answer
Answer
Parameters/Comments
{
"Type":"BillSettings",
"level":"1",
"CurrencyCode":"1642",
"ScalingFactor":"100",
"DecimalPlaces":"2",
"StackerCapacity":"300",
"EscrowAvailable":"true",
"BillValues":[
{"BillValue":"1"},
{"BillValue":"5"},
{"BillValue":"10"},
{"BillValue":"0"},
{"BillValue":"0"},
{"BillValue":"0"},
{"BillValue":"0"},
{"BillValue":"0"},
{"BillValue":"0"},
{"BillValue":"0"},
{"BillValue":"0"},
{"BillValue":"0"},
{"BillValue":"0"},
{"BillValue":"0"},
{"BillValue":"0"},
{"BillValue":"0"}
],
"Manufacturer":"ITL",
"SerialNumber":"000051005569",
"Model":"BV0020 000",
"SWVersion":"1042"
}
Using this command you can get informations about the MDB
connected bill validator.
<BillValues> array contains the bill values that the device will
recognize.
Most of those are low level informations and you do not need to
use them in you application, since all MDB protocol will be
handled by the RASPIVEND board.
You can use, for example, the serial number and model to keep
tracking of the payment systems, service activities, cleaning, etc.
© 2016 – AUTOMATROM SRL – www.vendingtools.ro
