8
EN
8. USE WARNINGS
We recommend following the indications below in order to work in safety conditions.
•
All the operations must be carried out complying strictly with the safety rules of the
country where the device is to be installed.
•
It is STRICTLY FORBIDDEN to smoke during the installation or adjustment operations
of the cutting unit.
•
The Customer undertakes to comply with and make his staff observe all the rules
and regulations in force concerning safety, prevention of accidents and health in the
work place.
Therefore, the Customer assumes the responsibility to strictly follow all the rules and
regulations in force, as well as the special provisions in force in sport and public
installations the Customer declares to know after receiving all the relative necessary
information.
•
The cutting unit also works without its safety protective device. This protective device
must NEVER be removed.
•
Always check the resistance of the material to be cut and the kind of blade which is
being used.
•
The Customer shall equip his own personnel with all the individual safety protections for
the execution of the works, as well as with the ones which might be prescribed by the
Manufacturer due to specific danger conditions of the plant or of the area where the
personnel must work.
•
Always pay attention to the electric cable position to prevent it from being cut or
damaged by the blade.
•
It is allowed to assemble cutting unit SW12SSX on machines O.E.M. on condition that
their original structure is not modified. Otherwise, the intervention must be certified by
Rasor
®
.
Firstly make sure that the lines and electric systems of the machine, on which the SW12SSX
will be installed, are able to supply the cutting unit with power correctly, in compliance with
the safety rules (for the feature required see par. 5).
We suggest installing a magnetothermic safety device before the cutting unit and check
that the ground circuit is effective. Before working on the feeding cable, unplug the unit.
Check that electric connections and protections correspond to the
driving force and to the plate data values (voltage and current),
required by the different electric circuits. Possible faulty ground
connections make the working conditions unsafe. Possible damages
are not charged to Rasor
®
. By referring to the CEI 11-27/1 standard
all the works carried out by means of electric current must be
performed by a staff, who has been provided with all the devices
required by the above-mentioned standard. For the works carried
out under voltage, it is necessary that the employer certifies the
suitability, against formative processes. As the cutting unit SW12SSX
is supplied without plug, the user must use a plug homologated in
the country in which the cutting unit is used. In the European Countries
a Shuko plug is required (see picture 3). Never change the lenght of the
cable supplied. The cutting unit SW12SSX is a class II electric device;
therefore, it does not need earthing.
WARNING
3
9. ELECTRIC CONNECTION
