A
10. USE
3
To use the electric scissors manually, proceed as follows:
1) Lay the material to be cut on a table;
2) Connect the scissors to the power supply;
3) Put the material on the cutting foot;
4) Enable the enabling push button (see picture 3);
5) Push the electric scissors in the desired direction,
being careful to keep the material in front of
them as stretched as possible and preventing it
from curling in the front part of the scissors.
NOTE
The thrust on the electric scissors must be as uniform
as possible. To carry out linear cuts with precision (and
to follow predetermined paths), we also recommend
using the arrow point (see point “A” in picture 4).
4
11. MOTOR FUSE REPLACEMENT
In order to replace the motor fuse, proceed as follows:
1) Disconnect the scissors from the power supply;
2) Remove the screw from the fuse cover (see
point “A” picture 5);
3) Take out the glass fuse by means of the proper
pliers supplied (see picture 6);
4) Verify its integrity (see picture 7) and, in case, install a new
fuse checking the correct amperage;
5) Close the cover and tighten the screw.
WARNING
Never use the scissors when the fuse cover is open.
Risk of electric shock.
5
6
7
A
Enfocus Software - Customer Support
EN
25