6
EN
4. DESCRIZIONE PRODOTTO
2
1
3
13
15
5
9
7
8
10
14
6
11
12
16
4
The fixture described in this manual is a pneumatic scissor model FP
862
which is used in
order to quickly cut fabrics in the textile industry and other materials. It is extremely versatile,
light and precise in the cutting operation, suitable also for very difficult cuttings.
Thanks to the use of a supporting front foot and of an effective cutting system with
pentagonal or octagonal blade, it is possible to use the pneumatic scissors to cut different
materials, such as wool, cotton, synthetic fabrics, leather, eco leather, silk, paper patterns,
filters, coated fabrics, technical and rubber fabrics, etc., with a thickness up to 2.5 cm.
One special feature of pneumatic scissors FP
862
is their ability to sharpen the blade in each
moment without disassembling it by means of a grinding wheel mounted on the scissors
head. The pneumatic scissors are provided with a threaded connection to the pneumatic
circuits. The turbine, perfectly balanced, with a high number of revolutions and totally free
of maintenance, reduces the vibrations and the noise to the minimum.
The pneumatic scissors can be used also outdoor and to cut damp or wet materials and
therefore particularly recommended in tannery, dyeworks, etc.
The pneumatic scissors FP
862
are extremely light (they weight only 1 Kg) and handy and
allow carrying out quick and precise cuts, even with curve profiles. The use of compressed
air as source of energy allows working continuously without problems of heating or motor
overload. The mechanical parts are made up of steel and high resistant bronze and require a
lubrication after many working hours.
1
1/4" gas connection for the air
connector
9
Sharpening button
2
Safet device to enable the control
lever
10
Front guard of the blade (movable)
3
Control lever
11
Rear protection guard of the blade
(fixed)
4
Supporting foot
12
Motor support
5
Polygonal blade
13
Silencer
6
Greaser
14
Reference drift
7
Pneumatic motor
15
Counterblade
8
Sharpener
16
Plate blocking the threads
Device components
