EN
7
7. FIELD OF APPLICATION
The maximum acoustic pressure level emitted by cutting unit FP861A2 is about 72 dB (A).
Noise tests have been carried out in compliance with Standard UNI EN ISO 15744:2008. The
device noise levels, measured at different distances (without any sound wave filtering system),
vary in the extent of few db (A). The noise level has beeen detected with the silencer
supplied with the fixture assembled on the exhaust. The silencer must never be removed.
NOTE
It is advisable for cutting unit FP861A2 owners to verify the compliance with the standard
concerning safety of workers: refer to the Local Law.
Cutting unit FP861A2 has been designed, manufactured and assembled to cut textile or
technical fabrics, with the exception of metal, plastic or wood, by means of rotary blades.
This equipment must not work:
- in areas prone to explosions;
- in presence of fine dust or corrosive gases;
- to cut plastic, metal and wooden materials.
It is forbidden to use cutting unit FP861A2 for purposes
different from the above-mentioned ones.
5. TECHNICAL FEATURES
The technical data are only indicative and they can be changed without notice.
6. NOISE LEVEL
86 mm with hard-metal counterblade
900 rev/min
about 25 mm
400 W (by nominal working pressure)*
9 litres/sec.
1350 g
3050 g
LUX 200
1,36 m/s
2
(ISO 8662)**
0 ~ 55°C
10 ~ 95% without condensate
* The data refer to a suggested working pressure of 6 bar (ISO 2787: 1984)
** Rasor recommends using dry air lubricated with special Rasor VG 5 pneumatic oil
Humidity
Weight with package
Minimum luminosity for working
operations
Vibrations at the start up
Temperature
Cutting working depth
Power
Weight
Cutting unit FP861A2 features
Blade speed
Air consumption
Blade diameter
5 side blade Ø 86 mm in HSS steel
8 side blade Ø 86 mm in HSS steel
5 side blade Ø 86 mm, in H.S.S. steel
covered with Teflon
®
8 side blade Ø 86 mm in HSS steel
covered with T.I.N.
8 side blade Ø 86 mm, in H.S.S. steel
covered with Teflon
®
8 side blade Ø 86 mm in integral hard
metal
86THSSTF
86TMD
86THSSTN
Features of the available blades
86PHSS
86THSS
86PHSSTF