background image

WARRANTY

Rasor

®

 Elettromeccanica S.r.l.

 

electric scissors have a 12 month warranty from the date

indicated on the last page of this manual, except in case of different written agreements.
The warranty covers all manufacturing and material defects. Replacement and repair operations
are covered only if carried out by our company and at our workshop.
In case of returned goods for repair under warranty, the Customer must send to Rasor

® 

always

the complete machine. Repairs under warranty of single faulty components are not accepted.
The material to be repaired must be sent CARRIAGE FREE.
Once the machine has been repaired, it will be sent CARRIAGE FORWARD to the customer.
The warranty covers neither technicians' intervention on site nor the machine disassembly
from the installation place.
If for practical reasons, one of our technicians is sent to the premises, the customer will be
charged the costs plus the travelling expenses.

The warranty does not include:

failure caused by wrong use or assembly,

failure caused by external agents,

failure caused by lack of maintenance or neglicence;

blades and components subject to wear.

WARRANTY FORFEITURE:

In case of arrearage or other breaches of contract,

Whenever changes or repairs are carried out on our electric scissors without our

prior authorization,

Whenever the serial number is tampered with or cancelled,

Whenever the damage is caused by improper use, bad treatment, bumps, falls and

other causes not due to normal working conditions,

Whenever the unit seems tampered with, dismantled or previously repaired by

unauthorized staff,

In case the pneumatic scissors are used for purposes that are different from the

ones described in this manual.

All repair operations carried out under warranty do not interrupt its duration.

All disputes will be settled in the court of justice of Milan (Italy).

We thank you in advance for the attention you will pay to this manual and we invite you to
inform us of any change you deem necessary to improve it and make it more complete.

Summary of Contents for FP861
















Reviews: