21
7.
Room temperature setup button:
In power on state, press
the temperature button to adjust the set temperature among 22°C
or 28°C. In room temperature setup mode, the wind speed is
medium and cannot be adjusted. When the room temperature
reaches the set temperature, the appliance stops heating function,
and the fan starts running; when the room temperature is 2°C
lower than the set temperature, the heater function automatically
starts to work.
•
Filling Water Steps:
If the cooler and humidifier functions are needed, please first remove
the water injection gate in the rear side of the unit, and then slowly
fill water into the tank. Please be noted that:
1.
Please turn off the power and unplug the appliance before filling
water.
2.
Pay attention to the water level display when adding water.
3.
Do not exceed the maximum water level.
4.
Install the water injection gate in place after filling water.
5.
Please use clean tap water with no additive.
6.
Please do not add hot water in the water tank.
