Installation of indoor unit
2. Make the power connection wire go
through the cable-cross hole at the back
of indoor unit and then pull it out from
the front side.
3.
Outdoor unit connection
4.Put wiring cover back and then tighten the screw.
5.Close the panel.
●
For the air conditioner without plug, an air switch must be installed in the line.
32
cable-cross
hole
Remove the wire clip; connect the power connection wire to the wiring terminal
with wire clip.
Note:
●
power connection
wire
All wires of indoor unit and outdoor unit should be connected by a professional.
for a new one. Avoid extending the wire by yourself.
installation.
The air switch should be all-pole parting and the contact parting distance should
be more than 3mm.
N(1)
2
3
blue black brown yellow-
green
