background image

11 

SAFETY PRECAUTIONS (Be sure to read carefully and follow these safety instructions) 

1.

 

Be sure to read the following safety precautions, in order to avoid possible injury to 

yourself or others and damage to your belongings. 

2.

 

The user must use qualified socket with safety certification, or it may cause fire. 

3.

 

This appliance can be used by children aged from 8 years and above and persons with 

reduced physical, sensory or mental capabilities or lack of experience and knowledge 
if they have been given supervision or instruction concerning use of the appliance in a 
safe  way  and  understand  the  hazards  involved.  Children  shall  not  play  with  the 
appliance.  Cleaning  and  user  maintenance  shall  not  be  made  by  children  without 
supervision.   

4.

 

The appliance is not to be used by persons (including children) with reduced physical, 

sensory or mental capabilities, or lack of experience and knowledge, unless they have 
been given supervision or instruction. Do not allow children to climb on the fan. 

5.

 

Only use the fan with the original adapter. Make sure that the adapter and main body 

are well connected before use, otherwise it will cause the appliance overheat or 
damage due to contact failure. 

6.

 

Hold  the  main  plug  when  disconnect  from  the  power  supply,  never  pull  the  supply 

cord. 

7.

 

Make sure main plug is fully inserted into socket. Loose engagement of main plug and 

socket may cause electric shock or fire due to overheating of the main plug. 

8.

 

Wipe off dust on the main plug and socket periodically. Accumulation of dust on main 

plug may cause poor insulation and may result in fire. 

9.

 

Do not use the fan when the power cord or main plug is damaged. If the supply cord 

is damaged, it must be replaced by the Shun Hing Electric Service Centre Limited in 
order  to  avoid  the  hazard.  If  the  power  cord  is  damaged  or  the  fan  is  malfunction, 
please take the fan to Shun Hing Electric Service Centre Limited for repairing. Do not 
disassemble, repair or replace with parts and accessories without authorities.   

10.

 

Do not pinch, bend, or twist the power cord excessively. The core conductors may be 

exposed  or  broken  which  may  cause  electric  shock,  short  circuit,  fire  and  product 
damage. 

11.

 

Do not contact with water. It may cause electric leakage, short circuit, product damage 

and fire. 

12.

 

Do not cover the fan in order to avoid overheating. 

13.

 

Please do not put any object on the fan body. 

14.

 

Never touch the fan and power plug with wet hands to avoid electric shock. 

Summary of Contents for RLF-30KM























Reviews: