– 17 –
層
層
疊
蒸
氣
鍋
i-Steam
Food
Steamer
6. Operation Instruction
1. Make sure that the appliance is off beforehand. Add clean water into the water tank, water added
must be in between the minimum water level “MIN” and the maximum water level “MAX”.
(Maximum volume is approx. 1.2L). Assemble the required accessory, then close the transparent lid.
2. Make sure the appliance is plugged firmly before use.
3. Press [FUNCTION/CANCEL] button to choose desired function. (There are three functions in total).
Indicator of selected function will light up and the remained operation time will shown on display
in descending order, which means the appliance is in operation.
4. To cancel the operation, long press [FUNCTION/CANCEL] button for 3 seconds during operation,
“OFF” will show on display meaning operation is cancelled.
*** CAUTION! The appliance equipped with boil-dry protection system. If water inside the water
tank completely evaporated or temperature exceeds the protection level, the appliance will be
automatically switched off. If the appliance was boiled dry once, switch off and cool down 15
minutes before reuse.
6.1 Food Steaming
1. Follow the illustrations below to assemble the food steamer accessories.
Single Deck
Double Deck
2. Press [FUNCTION/CANCEL] button to select STEAM mode, the “STEAM” indicator will flash on display.
Press “
▲
” or “
▼
” button to increase or decrease the operation time. Once finished, leave it for 10
seconds and the “STEAM” indicator will light up, the operation time set will show on display and
start counting down, meaning STEAM function is in operation. (The maximum setting time for
STEAM mode is 1 hour and 30 minutes).
3. Lift the transparent lid once water is boiling. Place the food on the steam plate and close the lid.
4. Pay attention to the hot steam when open the lid. Beware of the condensed water dropping on
the control panel or the power plug.
5. When STEAM function is finished, the appliance will automatically turn into WARM function, the
default time is 2 hours and the display will show “2:00”. User can adjust the time from 1:00 to 3:00.
Once the WARM time is finished, the appliance will be shut down, and display will show “OFF”.
