Rasonic RC-X9U, User Manual

Page: 8 / 32

7
Press the POWER keypad to turn the unit on/off.
(The TIMER keypad controls the auto start/stop feature of the unit.)
Press the "MODE" keypad to select the appropriate operating mode. The mode selection
will alternate between AUTO, HEAT, COOL, FAN and DRY. The green indicator light beside
the "MODE" option will illuminate, identifying the mode selected.
When using the DRY and AUTO mode, you cannot select a fan speed. The fan motor
operates on LOW speed in DRY mode and on MED speed in AUTO mode.Some models
wihtout MED speed,the fan motor operates on HIGH speed in AUTO mode.
Press the keypad to increase the set (operating) temperature of the unit.
Each time the keypad is pressed the temperature increases as follows:
O O 1 C (Celsius Scale) Maximum Setting 30 C
Press the keypad to decrease the set (operating) temperature of the unit.
Each time the keypad is pressed the temperature decreases as follows:
O O 1 C (Celsius Scale) Minimum Setting 17 C
Press this keypad to activate the appropriate fan speed setting. Each depression of the
keypad will alternate through LOW, MED(some models without), HIGH fan speed options.
The green indicator light beside the FAN speed option will illuminate, identifying the fan
speed selected.
Press the "TIMER" keypad to activate the "auto start/auto stop" timer function.
Auto start/stop programs can be set from 0~24 hours. Each depression of the "TIMER"
keypad will increase or decrease the selected time in 0.5 hour increments up to 10 hours,
then by 1 hour increments up to 24 hours.
Press the "SWING" keypad to activate the automatic air swing (oscillation) feature. The
green indicator light adjacent to the "SWING" keypad will illuminate, identifying to the selected
mode is operational. The vertical louvers will oscillate back and forth (side to side)
automatically sweeping air alternately for comfortable cooling. To stop the air swing feature,
press the "SWING" keypad again, the green indicator light adjacent to the keypad will go off.
Press the "SWING" keypad for 2 seconds will activate the SLEEP mode which can reduce
noise creating a comfortable sleeping environment.
When the SLEEP mode is activated, the green indicator light beside the "SLEEP" function
will illuminate.