background image

Warning: low burning

velocity material    

(For R32 models apply to 

IEC60335-2-40:2018)

5

 WARNING for Using R32 Refrigerant

-Do not use means to accelerate the defrosting process or to clean, other than those recommended by the manufacturer.

-The appliance shall be stored in a room without continuously operating ignition sources (for example: open flames, an

operating gas appliance) and ignition sourcesor (for example:an operating electric heater) close to the appliance. The ap-

 pliance shall be stored in a room without continuously operating ignition sources (for example: open flames, an operating

gas appliance or an operating electric heater).

-Do not pierce or burn.

-Be aware that the refrigerants may not contain an odour.

-Compliance with national gas regulations shall be observed.

-Keep ventilation openings clear of obstruction.

-The appliance shall be stored so as to prevent mechanical damage from occurring.

-A warning that the appliance shall be stored in a well-ventilated area where the room size corresponds to the room area

as specified for operation.

-Any person who is involved with working on or breaking into a refrigerant circuit should hold a current valid certificate

from an industry-accredited assessment authority, which authorises their competence to handle refrigerants safely in acc-

 ordance with an industry recognised assessment specification.

-Servicing shall only be performed as recommended by the equipment manufacturer. Maintenance and repair requiring

the assistance of other skilled personnel shall be carried out under the supervision of the person competent in the use of

flammable refrigerants.

-Please follow the instruction carefully to handle, install, clear, service the air conditioner to avoid any damage or hazard.

Mildly Flammable Refrigerant R32 is used within air conditioner. When maintaining or disposing the air conditioner, the

refrigerant (R32) shall be recovered properly, shall not discharge to air directly.

-No any open fire or device like switch which may generate spark/arcing shall be around air conditioner to avoid causing

ignition of the flammable refrigerant used.Please follow the instruction carefully to store or maintain the air conditioner

to prevent mechanical damage from occurring.

-Mildly Flammable refrigerant is used in air conditioner. Please follow the instruction carefully to avoid any hazard.

IMPORTANT NOTE:Read this manual 

carefully before installing or operating 

your new air conditioning unit. 

Summary of Contents for RC-X7R

























Reviews: