15
5.
In working condition, press HEATER key to shift it from high
heating power to low heating power, second press turn into high
heating power, third press enter into low power heating again,
followed by recycling.
Low heating power
：
LED (
) on.
High heating power: LED (
) on, low heating power works
for 20 seconds and then turns to high heating power.
6.
In working condition, press the ECO key, LED indicator ECO lights
on.
ECO Mode: Default temperature is 22
℃，
if the room temperature
is lower than 18
℃，
the heating is in high power; if the room
temperature is 18-22
℃，
the heating is in low power; if the room
temperature reaches 22
℃
or above, the unit is in stand by mode.
7.
In working condition, press OSC key to make the device swing or
not.
Swing on
：
LED (
) on.
Swing off
：
LED (
) off.
8.
In working condition, press SET key to set the time.
Enter the timer setting mode, the LED (
) will be on and
flicker per 0.5 second. At this time, press
/
key to set
the timer (within a range of 1-24 hours), the time will be
added or minus by 1h every press. When time of
/
press length is more than 2 seconds, the display rapidly
changes in 0.2 seconds.
Enter the timer setting mode, the timer that has been set
before can not be changed. You can reset the time, only
when pressing
/
key, and timer that you have set will
be effective at once.
If there is no operation to the keys after 5 seconds or press
other keys except
/
,then the LED indicator will show
the room temperature.
If the value show number except 0,the timer start timing(not
shown),if the timer turns to value 0, then the device will turn
