14
OPERATION AND USE
Button and display panel
1.
Connect the appliance to the single power outlet.
2.
Make certain that the power source conforms to the electrical
requirements of heater. (AC220-240V~/50Hz) before connecting
to the power supply
；
3.
Press the mechanical power switch which is in the back of the
device, the device enters into energized state with a Bi sound.
4.
Under stand by mode, all the pressing are invalid except
key.
Press
key, the device starts working. Press it again, the
device turns off, panel will display shutdown function ( 10
→
0). The
default situation after turning on:
PTC: Low heat, LED (
) on.
Swing: Swing off, LED (
) off.
Timer: 0h (no timer setting), LED (
) off.
Temperature display: room temperature display, LED ( ) on.
Fan: Turn on.
Temperature setting: default setting as 25
℃
