LD-705
6
PH60/LD60
PH66/LD60
PH72/LD72
PH84/LD84 (photo not available)
PH96/LD96
STEP FIVE: Lighting Instructions and Operation.
IMPORTANT: CHIMNEY DAMPER MUST BE WIDE OPEN
MANUAL MATCH LIGHTING.
(For use only with Natural Gas Burner Models LD (30X, 36, 48, 60, 72, 4, 96)-N)
1. Place lighted match on embers near inlet end of burner.
DO NOT HOLD MATCH IN HAND!
Move away from front of fireplace.
2. Slowly open
FIREPLACE GAS SUPPLY VALVE
and wait for burner to light. (See FIGURE 7)
3. Adjust
FIREPLACE GAS SUPPLY VALVE
for desired flame height.
4.
Adjust front burner with attached manual valve(s)
to provide desired ember/flame effect. Note: The natural gas versions of
LD30 and LD36 have one front burner valve; LD48 and LD60 have two. The propane versions of all models have fixed front burner
flames. The rear burners are valved for flame balance control of the rear burner.
5.
SHUTDOWN:
Close
FIREPLACE GAS SUPPLY VALVE
completely
.
Front Burner Valve
CLOSED
(handle parallel to floor)
Front Burner Valve
OPEN
(handle upturned)
f i r e - p a r t s . c o m
