11
WARNING:
Failure to position the parts in accordance with these diagrams or failure to use only parts specifically
approved with this heater may result in property damage or personal injury.
STEP THREE: HF18 and 24 LOG PLACEMENT AND PAN MEDIUM
6. CENTER AND TOP LOGS
Using the log locator holes and pins (Figure 9A and B), place the
Center Top Log
(Figure 9C) diagonally over both
Front Logs
. The pins for the center log will be the right side pins if facing each front log. Next place the right and left
top logs over the remaining two log locator pins (Figure 10A and B). The top logs for the DF-HG18 will be the CH3a
chunks shown below. For the 24” and 30” use the BE2a chunks (see page 4, #6).
FIGURE 9
A)
Log Locator Hole
B
) Log Locator Pins
A)
Log Locator Hole
C)
Center Log
FIGURE 10
C)
Top Log
B
) Log Locator Pin