System Configuration
User Manual
ApplianceStor 30
July 2012
46
3.
Use the up/down arrow keys to select a drive, and then press <Space> to select. A small
triangle marks the selected drive. Press <Enter> after completing your selection and
return to the utility main menu.
Exiting the Intel® Rapid Storage Technology utility
To exit the utility:
1.
From the utility main menu, select 5. Exit, and then press <Enter>. The following warning
message appears.
Figure 51 - Execute recovery volume
2.
Press <Y> to exit or press <N> to return to the utility main menu.
Rebuilding the RAID
This option is only for the RAID 1 set.
Rebuilding the RAID with other non-RAID disk
If any of the SATA hard disk drives included in the RAID 1 array failed, the system displays the
status of the RAID volume as "Degraded" during POST. You can rebuild the RAID array with other
installed non-RAID disks.
To rebuild the RAID with other non-RAID disk:
1.
At the prompt, press <Ctrl> + <I> to enter the Intel Rapid Storage Technology option
ROM utility.
2.
If there is a non-RAID SATA Hard Disk available, the utility will prompt to rebuild the
RAID. Press <Enter>, and then use up/down arrow keys to select the destination disk or
press <ESC> to exit.
