background image

 

PX3TS Transfer Switch Quick Setup Guide 

1

QSG-PX3TS-0A-v2.6-E 

 255-80-0032-00 RoHS 

 

Raritan PX3TS 

Quick Setup Guide 

The PX3TS transfer switch provides AC power to rack IT equipment from one of two AC power sources, and automatically selects which 
source powers the load based on power availability and quality. 

This Quick Setup Guide is intended for experienced users. For detailed instructions, refer to the PX3TS series User Guide or online help 
from the 

Raritan website

 (

http://www.raritan.com

). 

 

 

 

Safety Precautions 

WARNING!

 Read and understand all sections in this guide 

before installing or operating this product. Failure to heed any 
of the following WARNINGS may result in electric shock, fire, 
personal injury and death. Prior to operating this product, the 
user should read the online User Guide and specifically the 
warnings in that Guide. 

WARNING!

 This product contains two inlet power plugs and a 

safety hazard may exist if one plug is disconnected and the 
other is connected to an energy source. Before connecting or 
disconnecting either inlet plug, make sure both sources of 
power to this product are turned off. 

WARNING!

 Connect this product to an AC power source 

whose voltage is within the range specified on the product's 
nameplate. 

WARNING!

 Connect this product to an AC power source that is 

current limited by a suitably rated fuse or circuit breaker in 
accordance with national and local electrical codes. 

WARNING!

 Use this product in a dry location. 

WARNING!

 Connect this product to a protective earth ground. 

Never use a "ground lift adaptor" between the product's plug 
and the wall receptacle. 

WARNING!

 If this product is a model that requires assembly of 

its line cord or plug, all such assembly must be performed by a 
licensed electrician and the line cord or plugs used must be 
suitably rated based on the product's nameplate ratings and 
national and local electrical codes. 

 

QS Rule 

 

What's Included 

 

The PX3TS device 

 

Bracket pack and screws 

 

Quick Setup Guide 

 

Warranty card 

 

Two fuses (for models with fuses implemented) 

 

A null-modem cable with DB9 connectors on both ends 
(Raritan number: 254-01-0006-00) 

 

QS Rule 

 

Mounting the PX3TS 

1.  Attach mounting ears and mounting brackets to each side 

of the PX3TS with provided screws. 

 

 

Summary of Contents for PX3TS










Reviews: