Raritan PX3-3000 series, User Manual

Page: 191 / 875

Chapter 6: Using the Web Interface
167
+12V Power Supply Sensor (for iX7™ Only)
An iX7
™
PDU's controller receives DC 12V power from its inlet. A sensor
monitors the power supply status and indicates it on the PDU page.
State Description
OK The iX7
™
controller is receiving power from its inlet.
fault The iX7
™
controller cannot receive power from its
inlet because of a power failure on the inlet or a
broken 12V power supply. Instead it receives power
from another iX7
™
PDU. See Power-Sharing
Restrictions and Connection (for iX7
™
Only) (on
page 47).
After entering the fault state, this sensor is listed in
the Alerted Sensors section of the Dashboard. See
Dashboard
(on page 144).
unavailable The communication with the 12V power supply
sensor is lost.
Alternatives for checking the 12V power supply status:

Dot-matrix LCD panel. See
PDU
(on page 98).

CLI command:
show pdu details
. See
Using the Command Line
Interface (on page 444).