Raritan PX2-1000 SERIES, User Manual

Page: 504 / 648

Chapter 8: Using the Command Line Interface
485
Example
The following command has the PX enter the load shedding mode.
config:# loadshedding start
Power Control Operations
This section applies to outlet-switching capable models only.
Outlets on the PX device can be turned on or off or power cycled through
the CLI.
Besides, you can cancel the power-on process while the PX is powering
on ALL outlets.
You must perform this operation in the
administrator mode
. See
Different CLI Modes and Prompts
(on page 339).
Turning On the Outlet(s)
This section applies to outlet-switching capable models only.
This command turns on one or multiple outlets.
# power outlets <numbers> on
To quicken the operation, you can add the parameter "/y" to the end of
the command, which confirms the operation.
# power outlets <numbers> on /y
Variables:

<numbers> is one of the options:
all
, an outlet number, a list or a
range of outlets.
Option Description
all Switches ON all outlets.
A specific outlet
number Switches ON the specified outlet.