Chapter 3: Installation and Configuration
21
Below indicates the ETHERNET port on PX2 Zero U models:
For 1U/2U models, the ETHERNET port is usually located on the back except
for a few models. This diagram shows the port on the back.
Warning: Accidentally plugging an RS-232 RJ-45 connector into the
ETHERNET port can cause permanent damages to the Ethernet
hardware.
To make a wireless connection:
Do one of the following:
Plug a supported USB wireless LAN adapter into the USB-A port
on your PX.
Connect a USB docking station to the USB-A port on the PX.
Then plug the supported USB wireless LAN adapter into the
appropriate USB port on the docking station.
See
USB Wireless LAN Adapters
(on page 21) for a list of
supported wireless LAN adapters.
USB Wireless LAN Adapters
The PX supports the following USB Wi-Fi LAN adapters.
Wi-Fi LAN adapters
Supported 802.11
protocols
Proxim Orinoco 8494
A/B/G
Zyxel NWD271N
B/G
Edimax EW-7722UnD A/B/G/N
TP-Link TL-WDN3200 v1
A/B/G/N
Raritan USB WIFI
A/B/G/N
Summary of Contents for PX2-1000 SERIES
