12
Power Meter Quick Setup Guide
QSG-PMM-0
B
-E
255-64-0004-00
Configure Power Meter (PMM without PMB)
1
Enter a name.
2
Select the circuit type:
Single Phase
Split Phase
3-phase
3
Enter the mains circuit breaker rating.
4
Select the checkbox for each CT
installed.
Enter the CT rating. Ratings are marked
on the CT.
5
Click OK.
The configured power meter displays in
the dashboard.
If there are more unconfigured power
meters, the scan results stay open.
Configure Panel Mains Circuit
1
In the General tab, enter
a name.
2
Select the circuit type:
Single Phase
Split Phase
3-phase
3
Enter the number of
circuit positions in the
panel.
Select the panel layout:
one or two columns.
Select the circuit position
numbering style:
sequential or odd/even.
4
Click the Main Circuit
tab.
