8
WIRING
WIRING
WARNING: Hazard of Shock and Fire
• Always use proper wire, wire connectors
and fuse/circuit breaker. See Specification
Chart.
• Secure wire properly.
• Do not connect appliances to toilet circuit.
• Make sure power is off before proceeding.
• Use proper wire terminals for all wire
connections.
1. Determine proper wire size by measuring
distance from:
• Power Source to push button to toilet motor
and back to power source.
• Remote pump units - also include distance
from power source for remote pump to
remote pump and back. Same wire gauge
must be used for both lower base and
remote pump.
2. Select proper wire and fuse/circuit breaker
size from Specifications on Installation page.
3. Install fuse/circuit breaker in positive line at
source.
4. Wire control to the toilet and battery using
one of the wiring diagram supplied with the
control.
Mounting controls:
Refer to instruction enclosed with control.
Install the Warning Label (L322) where it can
be easily seen.
5. Route wire from control per wiring
diagrams.
6. Install seat. Install discharge support strap
between seat nut and the bowl (FIG 10).
Caution: To avoid kinking, do not pull on the
discharge hose. Be certain there is no pressure on
the discharge line.
7. Install mounting bushings, bolts. (FIG 11)
8. Tighten bolts being careful to not overtighten
(Do not exceed 30 inch lb. when tightening)
9. Install caps over mounting bolts.
Connect Hoses and wiring to toilet
Mount toilet
FIG 10
FIG 11
L490 0720jlc
Summary of Contents for Marine Elegance Toilet
Page 11: ...11 EXPLODED PARTS L490 0720jlc...