Dominion KX II Quick Setup Guide
6
QSG-DKX2-v2.6.0-0O-E
255-62-4022-00-RoHS
Configure the IPv6 Settings
If using IPv6, enter or select the appropriate IPv6-specific
network settings in the IPv6 section.
1
Select the IPv6 checkbox to activate the fields in the
section and enable IPv6 on the device.
2
Select an IP Auto Configuration option - None or
Router Discovery.
Link-Local IP Address
This address is automatically assigned to the device. The
address is used for neighbor discovery or when no routers are
present.
Read-Only
Zone ID
Identifies the device the address is associated with.
Read-
Only
A
None
- for a static IP. Default selection.
Recommended
option.
If
None
is selected, you must manually specify -
Global/Unique IP Address - this is the IP address
assigned to KX II
Prefix Length - this is the number of bits used in
the IPv6 address
Gateway IP Address
See IPv4 for details on leaving the selection set to
None
.
B
Router Discovery
Select this option to locate a Global or Unique IPv6
address instead of a Link-Local subnet.
Once located, the address is automatically applied.
Configure the DNS Settings
1
Do one of the following to configure DNS -
"Obtain DNS Server Address Automatically"
"Use the Following DNS Server Addresses"
A
Select "Obtain DNS Server Address Automatically" if
DHCP is selected.
The DNS information is then provided by the DHCP
server that is used.
When finished, click OK. Your KX II device is now
network accessible.
