SmartLock Kit Quick Setup Guide - DX2-DH2C2
5
SmartLock_DX2DH2C2_QSG_1B_3.4.20
255-90-0006-00
Optional Setting: Unlock Front and Rear Doors Simultaneously
By default, the PDU configuration is set to unlock only one lock at a time to preserve power. You must change the Active Powered Dry
Contact Limit to 2 if you require unlocking the front and rear door simultaneously at the rack.
•
Click PDU in the Main menu. Click Edit and change the setting as shown.
Power IQ Integration
If you are integrating SmartLock with Power IQ, you will need to do additional configurations to complete integration.
Power IQ relies on traps sent by your PDU to get the card reset events. Configure your PDU to forward card reader management
related events to Power IQ. See the online help for your PDU for further instructions on SNMP Settings and Event Rule Settings.
Once the configurations described in this guide are complete, Power IQ will have the required infrastructure support to implement a
solution with card authorization for unlocking cabinet doors. The following additional configurations are required on Power IQ to
accomplish this:
•
Card Access Management: Add and assign cards to users
•
Add PDUs in Power IQ
•
Data Center (EDM) association of PDU, Rack, and Door
•
Door Access Management: Associating the card reader to the rack and user authorization
See the Power IQ help for further instructions: https://www.sunbirddcim.com/
