Raritan DOMINION SX -, Installation And Operation Manual

Page: 129 / 172

A
PPENDIX
F: RSA ACE/S
ERVER
C
ONFIGURATION
119
Appendix F: RSA ACE/Server Configuration
This section provides guidelines for configuring the RSA ACE/Server 5.0 so that SecureID can be used as
the authentication mechanism. Users in an ACE server native database can log on to Dominion SX units
installed in the network using SecureID token authentication.
It is assumed that RSA ACE/Server is running RADIUS services and able to authenticate users from its
native database. This guide does not provide initial configuration procedures for the ACE server but
assumes that the administrator is familiar with the ACE server and has the ability to set up and configure
the application. Guidelines are provided to allow SecureID to be used with the Dominion SX units.
These steps must be performed on the RADIUS server in order to use SecureID:
1.
Configure all the units (define them in the RADIUS server database)
2. Establish profiles
3. Configure users and associate profiles to each
Please follow the steps below:
1. Select Start
→
Programs
→
RSA ACE Server
→
Database Administration-Host Mode .
Figure 97 Launching RSA Administration Application
2. Select Agent Host
→
Add Agent Host from the main menu to launch the configuration menu.
Figure 98 Add Agent Host Selection