Dominion KX II-101-V2 Quick Setup Guide
4
QSG-KX2101V2-v3.6.0-0E-E
255-62-3058-00-RoHS
The serial port communication settings should be configured
as follows:
115,200 Baud
8 data bits
1 stop bit
No parity
No flow control
Local User Port
The Local User port serves as a pass-through to the target
server video so that it connects directly to the monitor.
The local keyboard and mouse must be connected to target
server directly.
For USB configurations, only the local video connects to the
target server at the Local User port.
The keyboard and mouse connect directly to the target server
using USB ports.
QS R ule
Step 4: Configure KX II-101-V2
Note: You must use a crossover cable between the KX II-101-
V2 and client if you are configuring KX II-101-V2 through a
web browser.
For the following steps, you must change the default
password and assign KX II-101-V2 its IP address at the Local
Console.
All other steps can be performed either from the Local
Console, or the KX II-101-V2 Remote Console via a
supported web browser using KX II-101-V2's default IP
address.
Java 1.7
™
is required to use the Java-based Java-based KX
II-101-V2 Virtual KVM Client and Multi-Platform Client (MPC)..
You can also use a terminal emulation program to configure
KX II-101-V2. See
Configure the KX II-101-V2 Using a
Terminal Emulation Program (Optional)
(on page 7).
Change the Default Password
The first time you start the KX II-101-V2 device, you are
required to change the default password.
1. Once the unit has booted, enter the default username
admin
and password
raritan
. Click Login.
2. Enter the old password
raritan
, then enter and reenter a
new password.
Passwords can be up to 64 characters in length consisting
of English alphanumeric characters and special
characters.
3. Click Apply. Click OK on the Confirmation page.
Assign the KX II-101-V2 a Device Name
Choose Device Settings > Network. The Basic Network
Settings page opens.
1
Specify a meaningful Device Name for your KX II-101-
V2 device.
Up to 32 alphanumeric and valid special characters,
no spaces between characters.
Configure the IPv4 Settings
In the IPv4 section, enter or select the appropriate IPv4-
specific network settings.
1
Enter the IP Address, if needed.
The default IP address is 192.168.0.192.
2
Enter the Subnet Mask.
The default subnet mask is 255.255.255.0.
3
Set up your IP Auto Configuration by selecting - None
or DHCP
