Cat5 Reach DVI QSG
3
QSG-Cat5ReachDVI-0B-v1.0-E
255-80-0029-00 RoHS
5. Connect the transmitter and receiver to a power source
respectively. Each device's Power LED is then lit.
3. Aim the IR remote control at the IR receiver cable when
using the remote control.
6. Connect the computer to the transmitter using the
Raritan-provided DVI and USB-B to USB-A cables.
Note: If the computer only provides the VGA port, use the
DVI-to-VGA adapter that is included in the package.
When used, always connect BOTH adapters to the
transmitter for proper video transmission.
(Optional) If the Raritan-provided audio/microphone
cable has been connected to the transmitter in Step 2,
connect the other end to the computer.
QS Rule
Enabling or Disabling the Remote Console
The factory default is to enable the remote console, and the
keyboard and mouse control is determined on a
first-come-first-served basis. To prevent the local console
operation from being disturbed by a remote user, you can
disable the remote console and re-enable it after completing
your local operation.
To disable the remote console:
1. Press the REMOTE button on the transmitter.
2. Verify that the RX LED turns OFF, indicating that the
remote console has been disabled.
7. Turn on the computer.
QS Rule
To enable the remote console:
Using the IR Remote Control (Optional)
1. Press the REMOTE button on the transmitter again.
If the equipment connected to the transmitter is implemented
with the IR remote control feature, such as a DVD player, you
can connect the Raritan-provided IR cables to the Cat5 Reach
DVI.
2. Verify that the RX LED turns ON, indicating that the
remote console has been enabled.
QS Rule
Additional Information
To connect IR cables:
For more information about the Cat5 Reach DVI and the
entire Raritan product line, see Raritan's website
(www.raritan.com). For technical issues, contact Raritan
Technical Support. See the Contact Support page in the
Support section on Raritan's website for technical support
contact information worldwide.
1. Connect the IR blaster cable to the IR jack of the Cat5
Reach DVI transmitter, and aim at the IR sensor of the
connected equipment.
2. Connect the IR receiver cable to the IR jack of the Cat5
Reach DVI receiver.
