Cat5 Reach DVI QSG
2
QSG-Cat5ReachDVI-0B-v1.0-E
255-80-0029-00 RoHS
2. Local Video (DVI-I OUT)
3. DVI-I IN Port (connected to PC)
4. USB-B Port (connected to PC)
5. RJ-45 LINK Port
6. F/W Upgrade Port
Cat5 Reach DVI Receiver
Front View
1. LINK LED
2. Power LED
3. EDID Button
Note: The EDID button is used to adjust the video resolutions
of a KVM switch that does not support DDC. See the User
Guide for details.
Rear View
1. Power Input
2. Audio Out
3. Microphone In
4. DVI-D Out
5. USB Mouse Port
6. USB Keyboard Port
7. IR Jack
8. RJ-45 LINK Port
9. F/W Upgrade Port
QS Rule
Basic Installation
This section illustrates the connection to a computer. Refer to
the User Guide if you want to connect other types of devices,
such as a KVM switch.
To connect a computer:
1. Turn off all devices, including the desired computer.
2. (Optional) To set up a local console, connect a VGA or
DVI monitor, USB keyboard and mouse to the transmitter.
Note: A VGA monitor requires the use of a DVI-to-VGA
adapter, which is included in the package. When used,
always connect BOTH adapters to the transmitter for
proper video transmission.
(Optional) If the audio feature is needed, connect one
end of the Raritan-provided audio/microphone cable to
the transmitter.
3. To set up a remote console, connect a VGA or DVI
monitor, USB keyboard and mouse to the receiver.
Note: A DVI-D to VGA converter is needed for the VGA
monitor attached with the receiver. This converter is NOT
included and you need to purchase it.
4. Use a Cat5e/6 cable up to 500 feet (150 meters) long to
connect the transmitter and receiver. Plug either end of
the cable into the RJ-45 LINK port.
