RAPTURE VIDE IFQ27165, User Manual

Page: 5 / 28

5
DIAGRAM
1
2
3
4
5 6 8 9 7
1 Display
2 Power indicator light
3 Stand
4 Movable power button
5 DC input For DC adapter plug
6 USB-A sockets For connecting USB-A cables
6 HDMI socket For connecting an HDMI cable
7 DP sockets Two DP sockets for connecting DP cables
8 EARPHONE socket For connecting earphones
ASSEMBLY
Only attach the stand to the screen if you are going to use
it on a desktop. For wall mounting, the stand must not be
attached.
1. Remove the screen, stand, and assembly accesso-
ries from the packaging. Check that no components
are left in the packaging.
2. Set the monitor, screen down, on a desktop or other
hard surface. We recommend setting a cloth or blan-
ket on the worktop to cushion the screen.
3. Set the stand against the armature on the back of
the monitor – see picture below. Align bolt holes in
the armature and the stand.
4. Insert the supplied bolts into their holes and tighten.
5. To detach the stand, reverse the procedure above.
Note: We recommend checking the bolt regularly and
tightening if necessary.
Removing the stand
1. To remove the stand, press upward on the catch
under the screen’s leg (“1” in picture).
2. Turn the entire stand counterclockwise and up (“2”
in picture).
3. Pull the stand outward as indicated by the arrow.
INSTALLATION
Follow the instructions below when installing the monitor.
• The monitor must be placed within reach of a mains
socket. The socket should remain accessible to allow
easy unplugging later on.
• The screen may be used on its stand or on a suitable
wall mount. Neither a wall mount nor mounting acces-
sories are included.
• Set the screen on a hard, level surface, or mount on
a hard, level wall.