
BATTERY & CARDS
The R5X has a sealed non-replaceable battery that can only be replaced by the Raptor repair centre.
Dual SIM cards and Micro-SD storage cards are accessed by removing the battery cover.
The Raptor R5X has a multi-card slot, that will allow you to connect
multiple SIM and SD Card configurations to the device.
SIM and SD Cards are inserted into the side of the device via a SIM
tray that pops out.
Raptors use standard SIM card sizes and can be used with a SIM
card adapters if your SIM is a different size.
To install a SIM or SD card, please use the SIM Tool provided with the
device to remove the SIM card tray from the device.
1. Gently insert the SIM Tool into notch on the SIM tray and prise it
out carefully. Full remove using your fingers.
2. You can now insert SIM and SD cards into the tray. The
combinations can be:
1x SIM card + microSD card
2x SIM card (dual sim)
1x microSD card on it’s own
Please make sure you have installed the SIM and microSD cards in
the correct orientation.
3. Once the cards are placed into the tray as shown to the left simply
re-insert the tray. back into the slot in the device, being careful not
to let the cards drop out of their holders.
4. Firmly push the card tray into the device until it is flush with the
case. This ensures the IP rating for water and dust proofing is
maintained.
5. The device should recognise any new card inserted and you can
follow instructions
that
pop
up.
Installing a SIM card
R
1
2
R
1
R