Attaching the screen protector
Attach the screen protector following these instructions:
All Raptors are provided with a screen protector which must be used in order to
maintain the warranty of the device.
A screen protector not only helps defend against scratches and knocks to the screen,
but it will also help prolong the life of your device.
Step 1:
Check
there
isn’t
already
a
screen
protector
on
the
device.
Most
Raptor
smartphones
have
one pre-attached in the box.
Step 2:
Remove the old screen protector if necessary by simply peeling it of. Now make sure you
clean
the screen thoroughly to remove dirt, dust and any fluff that will create bubbles in the adhesion.
Step 3:
Peel
the underside of the screen protector off, being careful not to let it touch anything.
Step 4:
Now carefully line up the top of the screen protector with the top of the device LCD. Carefully
let it drop onto the screen making sure it lines true all the way down to the bottom as you go. Use a
credit card to smooth out any bubbles as you go.
Step 5:
Once you’re happy,
peel
off the top protective layer of the screen protector off and you’re
done!