background image

- 2 - 

2 - CORRECT OPERATION / GENERAL WARNINGS 

1) 

Retain this Manual for future reference. 

2) 

Do not use this hoist in areas containing flammable vapors, liquids, gasses or 

combustible dust or fiber. 

3) 

Do not use the hoist in highly corrosive, abrasive, wet environments. 

4) 

The hoist can be used in ambient temperatures between -10C and +50C. 

5) 

At ambient temperatures below 0C the hoist brake should be inspected and tested 

before operation. 

6) 

Never exceed the capacity stated on the hoist. 

7) 

Do not use the hoist for lifting or transporting of personnel. 

8) 

Do not lift or transport loads while any personnel are under or within the danger 

zone. 

9) 

It is the operators responsibility to ensure the load is attached to the hoist in a safe 

and secure manner before movement of load. 

10)  Never leave a suspended load unattended. 

11)    Never use other devices to exert extra force to the lifting or lowering application. 

12)  Never use the load chain to sling around item to be lifted. 

13)  Respect hoist, always place hoist safely/carefully on the ground. 

 

 

 

 

 

 

 

 

 

 

 

 

Summary of Contents for LW75












Reviews: