GB USER MANUAL
4
RAPTOR HEAVY DUTY LED STRIP: WARNINGS!
1. Never connect the LED STRIP to a power supply while it is packaged or wound onto a reel!
2. Do not twist, hang vertically, unsupported in the middle or bend along short side:
Minimum bending diameter = 8cm. Do not fold the LED strip during installation.
3. Do not use the rope light when covered or recessed into a surface.
4. Do not open or cut the LED STRIP.
5. This LED STRIPS must not be used without all gaskets / connectors being in place.
6. Do not connect this rope light to another manufacturer’s product.
7. Connections shall be made only using the supplied RAPTOR connectors. Any open ends must be
sealed-off before use with end-caps.
8. Do not cover this product - may cause overheating, melting or fire.
9. Do not submerge the LED STRIP in liquids or use the product in the vicinity of standing water or
other liquids.
RAPTOR LED ROPE LIGHT: WARNINGS!
1. Never connect the Rope Light to a power supply while it is packaged or wound
onto a reel!
2. Do not twist, hang vertically, unsupported in the middle or bend along short
side:
Minimum bending diameter = 8cm. Do not fold the LED strip during installation
3. Do not use the rope light when covered or recessed into a surface.
4. Do not open or cut the rope light.
5. This rope light must not be used without all gaskets / connectors being in
place.
6. Do not connect this rope light to another manufacturer’s product.
7. Connections shall be made only using the supplied RAPTOR connectors. Any
open ends must be sealed-off before use with end-caps.
8. Do not cover this product - may cause overheating, melting or fire.
9. Do not submerge the Rope Light in liquids or use the product in the vicinity of
standing water or other liquids.
10. Do not route the cord through walls, ceilings, doors, windows, or any similar
RAPTOR LED ROPE LIGHT: WARNINGS!
1. Never connect the Rope Light to a power supply while it is packaged or wound
onto a reel!
2. Do not twist, hang vertically, unsupported in the middle or bend along short
side:
Minimum bending diameter = 8cm. Do not fold the LED strip during installation
3. Do not use the rope light when covered or recessed into a surface.
4. Do not open or cut the rope light.
5. This rope light must not be used without all gaskets / connectors being in
place.
6. Do not connect this rope light to another manufacturer’s product.
7. Connections shall be made only using the supplied RAPTOR connectors. Any
open ends must be sealed-off before use with end-caps.
8. Do not cover this product - may cause overheating, melting or fire.
9. Do not submerge the Rope Light in liquids or use the product in the vicinity of
standing water or other liquids.
10. Do not route the cord through walls, ceilings, doors, windows, or any similar
RAPTOR LED ROPE LIGHT: WARNINGS!
1. Never connect the Rope Light to a power supply while it is packaged or wound
onto a reel!
2. Do not twist, hang vertically, unsupported in the middle or bend along short
side:
Minimum bending diameter = 8cm. Do not fold the LED strip during installation
3. Do not use the rope light when covered or recessed into a surface.
4. Do not open or cut the rope light.
5. This rope light must not be used without all gaskets / connectors being in
place.
6. Do not connect this rope light to another manufacturer’s product.
7. Connections shall be made only using the supplied RAPTOR connectors. Any
open ends must be sealed-off before use with end-caps.
8. Do not cover this product - may cause overheating, melting or fire.
9. Do not submerge the Rope Light in liquids or use the product in the vicinity of
standing water or other liquids.
10. Do not route the cord through walls, ceilings, doors, windows, or any similar
