1301-0151
RUNNING BOARD
1.
Remove all contents from the package and check stainless steel running boards for any damage. Also,
verify that all components and hardware listed above are included before you begin installation.
2.
Read installation manual and installation drawing completely. Understand all
brackets and bolts before installation.
1
Components:
Driver
Qty. 1
Passenger Side Running Board
Qty. 1
Front Bracket
Qty 2
Center Bracket
Qty 2
Hardware:
M10 Flat
Washers
Qty 30
M10 Lock
Washers
Qty 12
M8 x 30 MM
Hex Head Bolts
Qty 2
Tools Required:
Torque Specifications:
For Cab Mount Installations
Cab mount bolts are torqued to 70 Ft Lbs. All other M8 through M12 sized bolts/nuts are set to 15-20 ft lbs.
Note: When installing the brackets and bars, all hardware must be left loose until all the items are attached.
M10 x 30 MM
Hex Head Bolts
Qty 6
Rear Bracket
Qty 2
Rear Bracket
Mount
Qty 2
M10 Hex Head
Nut
Qty 24
M8 Hex Head
Nut
Qty 2
Load Reaction
Studs
Qty 6
Rubber Block
Qty 6
M5 Hex Head
Nut
Qty 12
M8 Flat
Washers
Qty 4
M8 Lock
Washers
Qty 2
M5 Button
Head Bolt
Qty 12
RATCHET
TORQUE
WRENCH
17MM SOCKET
14MM SOCKET
L Bracket
(Used On
1500 Model Only)
Spacer Washer
Qty 12
Rev 2
1301-0151
