20
7.7.9 Saving Preset Settings
Different camera and frame grabber settings
can be saved in the “Preset” tab under the PIXCI E8
section of the GUI, shown in Figure 16.
Up to three different presets can be saved per settings file. Once the camera is set to the desired
state, click “Save 1”. This can be done a
further two times. These camera states can be recalled at
any time by using the recall buttons. The overall settings file can then be saved and loaded in this tab
also. Three preset states is the maximum number that can be saved in a settings file.
Figure 15: Manufactures Data Information.
Figure 16: Presets.
Manufactures data
displayed in this tab. The
sensor and PCB
temperature can also be
read.
Three different preset
states can be saved in
the following tab, with
each of them being able
to be recalled at any
time.
The states stored can be
then saved as a settings
file.
