8.3.9Reposition the hub in the drum by fastening the central screw and insert the spring
hub.
8.3.10 Fit the stop approximately 50 cm from the opposite end of the hose and reel the
new hose on the drum.
8.3.11 Grease if required. Reassemble the reel, following the operations in reverse order.
8.3.12 Insert a hexagonal wrench in the hub hole. Turn the wrench anti-clockwise so that
the Iimit stop is in contact with the hose guide end fitting. Prestress the spring by
continuing to turn the wrench anti-clockwise (5 turns).
8.3.13 Hold the wrench in position and fasten the nut.Perform a functional check.If the
hose does not go in completely or does not come out completely, readjust the
tension of the spring (point 12) Slide the limit stop to the required distance from the
end of the hose (minimum 1 metre).
9. Disposal
9.1 Completely empty all parts of the equipment ( hoses, pumps ,
tanks , etc ) and given case blown out with air .
9.2 Dangerous parts of the appliance must be made unusable f.e.
perforate pressure vessel , deform hose reels , etc.
9.3 Rubber , metals, glass ect. must be separated .
Dispose material fractions according to the local laws and regulations .
YOUR CONTRIBUTION TO PROTECT THE ENVIRONMENT
The pertinent regulations for the registration, setting up and operation of equipment for
dealing with materials hazardous to water must always be complied with by the user.
10. Warranty
10.1 In case of insufficient maintenance, faults on operation, use of not adequate spare
parts or attachments all liabilities and rights of claim under guarantee are void.
10.2 The manufacturer is not liable for improper use of the container or ignoring the
safety instructions.
10.3 Technical modifications are subject to change without announcement.
6
+49 (6158) 92980-0
Summary of Contents for BR 1.05.08-HW/E
Page 7: ...7 49 6158 92980 0...
