Rapid BR 1.05.08-HW/E, Operation Manual

Page: 3 / 8

2. General advice
These hose reels have to be used only for distributing fluids, at the pressures and
temperatures indicated on the schedule. We decline any responsibility for anomalies or
dangers which could arise by an hose assembly with characteristics and uses different from
the ones described herein.
3. Technical data
4. Description
The hose reels are made of stainless steel AISI 304 except for some parts made of nylon
and brass.
The hose rolling is done automatically by a spring made of high quality steel, incorporated in
the drum.The stop can be done at any desired length,
through an automatic locking device.
5. Assembling / Installation
WARNING: The installation of the hose reel and the
connection to the piping network are allowed to
qualified personel only!
IMPORTANT: The hose reel has to be wall mounted at
a minimum height from the floor of 2.50 m in order to prevent accidents during work
operations.
- Mount the hose reel to a solid, smooth wall surface using 2 screws 8 mm. in
diameter.
- Always connect the hose reel to the line with a flexible hose.
- Put an air valve on the feed line of the hose reel for ease of maintenance. The
air valve can be used as a safety valve in the event of an accident.
WARNING! The manufacturer declines any responsibility for injuries to people or damages
to things caused by a wrong assembly of the hose reel.
Model Art.No. Max. pressure Inlet Outlet Hose Hose length Weight
1.05.08-HW/E 01 013 20 bar 8mm 1/4" LPU 8x12 5m 3kg
1.03.10-HW/E 01 014 20 bar 10mm 3/8" LPU 10x14 3m 3kg
+49 (6158) 92980-0
3