2. General advice
6.1 ONLY FOR WASTE OIL OF KNOWN SOURCE FLASH POINT >
55°C FORMERLY DANGEROUS CLASS: AIII (VbF)
6.2 Always put up waste oil container secure, prevent
uninterntional moving.
6.3 Always keep the emptying valve closed.
6.4 Do not fill in water or petrol, paraffin, kerosene or other easy
inflammable liquids.
6.5 Always dispose your waste oil at the local collection deposit or
your oil dealer.
6.6 Before collection of waste oil always check how much waste oil
is still in the container.
6.7 Do not heat the container above normal inside temperature,
keep away from radiant heat or source.
6.8 Pressure reducing valve is firmly adjusted and may not be
changed.
3. Technical data
4. Description
5. Assembling / Installation
5.1. Screw collection pan pos. 2 on the filling pipe pos. 4 and seal with Teflon tape.
5.2. Put the funnel sieve top pos. 1 on to the collection pan pos.2.
5.3. Plug in steering bow pos. 7 in sleeves on the container and fix it with
screws.
See picture 1.
5.4. Close emptying valve pos. 12
5.5. Remove female adapter Pos. 17 from the male adapter Pos. 13 and screw
into the inlet of the collection tank
5.6. Hang in outlet bend of the emptying hose in the holder. Pos. 15
5.7. Assembling of wheels see Pict. 2
- Insert in the rollers Pos. 9 into the roll holders
Container capcity
ca. 80 liter
capacity of collection pan
ca. 10 liter
Pressure in container
max. 0,6 bar
weight
ca. 32 kg
Dimensions
600 x 600 x 1240 mm (LxWxH)
adjusting range of collection pan
1140 - 1820 mm
+49 (6158) 92980-0
3
