Program Button
7
4. Verify the RFID tag is programmed
by holding the tag over the RFID
reader with the lid open. The motor
should cycle after each scan.
5. If the RFID tag does not program
into the safe, the program function
will time out after ten seconds
and the safe will return to normal
operation. If multiple attempts to
program a RFID tag fails, please
contact Hornady at 800-338-3220.
6. One to five RFID tags can be
programmed into the safe.
How to Program Your Key Code
A single user defined 4 to 6 digit code can be entered into the RAPiD
®
Safe.
1. Open the RAPiD Safe with either the key or a previously programmed RFID tag
or key code. The safe ships with a default code and should be reprogrammed
before first use.
2. Locate the red program button to begin programming your key code. The first
available tag location will begin to blink to indicate program mode.
3. With the lid open, enter a 4 to 6 digit code into the keypad on the lid. Press the
“H” after entering your code. Verify your code is correct by re-entering your
code and pressing “H”. The motor should cycle.
4. Your key code can now be used to open the safe.
NOTE:
Only one key code can be entered into the safe. If a second code is
entered, it will override the previous code.
**
A total of 5 RFID tags and 1 key
code can be entered into the safe.
16-HMC-0113 Instructions Rapid Safes 2600KP-2700KP - INSIDE PGS-4A.indd 7
8/25/16 4:14 PM
