Operating instructions RS wash
│
D wash
│
P wash
│
SHERAprint wash
│
3Dewash
Rapid Shape GmbH
│
DOCR000257
24
│
29
8.1
Safety during cleaning and maintenance
CAUTION!
Risk of injury due to moving parts!
The machine consists in part of accessible parts that can
easily cause hand injuries through crushing or getting
caught.
—
When closing the drawer, do not insert any fingers
into the closing area of the drawer.
—
During operation, never reach into the area of the
rotors.
NOTE!
Material damage due to incorrect cleaning and
maintenance!
Observe the individual cleaning and maintenance steps
to avoid material damage to the machine.
8.2
Overview of the cleaning & maintenance work
Interval
What
How
Depending on use,
autom. display
Change cleaning
bottles
→
Chapter 8.2.1
1 /month
Check inner container
→
Chapter 8.2.2
Every 3 months
Check tubes
→
Chapter 8.2.3
Every 6 months
Change carbon filter
→
Chapter 8.2.4
The cleaning and maintenance of the machine is an
integral part of a properly functioning machine. It is
therefore essential to observe the prescribed cleaning
and maintenance work.
8.2.1
Change cleaning bottles
Required accessories:
Personnel:
1 new bottle of cleaning liquid, protective
gloves
Operator
To change the cleaning bottles, please proceed as follows:
1.
Put on protective gloves.
2.
Call up the bottle change wizard on the user interface.
Start the wizard.
