XG555 CAN to DeviceNet Gateway
3
April 21, 2005
•
Save transducer information to the data files
Saves the transducer information to the flash disk.
•
Display magnet positions
Prints the position of a selected magnet until ‘Q’ is pressed. Pr/- and 0-3 changes
the selected magnet and transducer. ‘+’ increments the selected magnet number; ‘-‘ will
decrement the selected magnet number. ‘0’ selects transducer 0, ‘1’ selects transducer 1,
and so on.
•
Quit
Exit setup mode and resume normal operation.
