33
Correcting the Lower Pot Cover Pressure
1.
Open the middle console cover. See “Opening the Middle Console Cover” on
page 28 for instructions.
2.
Rotate the lower pot cover pressure screw counter-clockwise 90 degrees (1/4 a
rotation).
√
√
NOTE:
The screw for the lower pot cover may be covered by sealant, if so use
pliers to remove the sealant before removing the screw. Then once
you have successfully corrected the pressure based on the steps
below, re-apply sealant in the location indicated in the image below.
90˚
Summary of Contents for FREDDA 1.0
Page 1: ...AI Rapid Cold Brew Maker Service Guide...
Page 2: ......