Ransomes RMP655, Safety, Operation & Maintenance Manual/Parts List

Page: 36 / 118

en-36
5 CONTROLS
5.2.Z.36 WARNING OIL-PRESSURE FAULT __________________________________
When this screen is shown, the engine oil pressure has decreased below the normal
level. If this happens during operation, Stop the engine and check the oil level. Top up if
necessary. If the problem persists consult your service dealer.
Press the button below the

to confirm the fault.
5.2.Z.37 WARNING CLEAR RADIATOR SCREENS ____________________________
When this screen is shown, the engine temperature has risen above the normal levels.
Park the machine in a safe area disengage cutting units, set engine to idle to allow
engine temperature to decrease prior to switching off the engine.
Clean the radiator and screens of all grass and debris.
Press the button below the

to confirm the fault.
5.2.Z.38 WARNING ENGINE FAULT ________________________________________
When this screen is shown, there is an engine fault.Stop the engine as soon as possible
and contact your service dealer.
When this fault occurs the machine go’s into limp-home mode.
Press the button below the

to confirm the fault.
5.2.Z.39 WARNING FOOT PEDAL FAULT ____________________________________
This screen is shown if there is a communications fault between the foot pedal and the
controller.
Stop the machine as soon as possible and contact your service dealer.
When this fault occurs the machine goes into limp-home mode.
Press the button below the

to confirm the fault.
NOTICE
The number in the top right of the screen indicates the total number of current
faults recorded. If more than one fault, it will cycle all current faults.
!
OIL PRESSURE
FAULT
1
!
CLEAR BUG
SCREEN
1
1
1