Ransomes MP655, Safety, Operation & Maintenance Manual/Parts List, Page: 94 / 116

en-94
10 QUALITY OF CUT
10.8 MISMATCHED CUTTING UNITS __________________________________________
NOTE: Arrow indicates direction of travel.
Mismatched cutting units is a pattern of varying cut
-
ting heights, resulting in a stepped cut appearance,
usually due to mismatched HOC (height-of-cut) ad
-
justment from one cutting unit to another.
Probable Cause Remedy
HOC inconsistent from one cutting unit to another. Check/adjust HOC on cutting units to same height.
(
Refer to Maintenance Section.
)
Difference in rotary cutting unit speeds. Check operation of rotary cutting motor(s) and re
-
pair/replace as necessary.
Difference in mower ride height side to side. Check/adjust tire inflation pressure. (
Refer to Mainte
-
nance Section.
)
Check/adjust for even mower weight distribution.
TN1278