Ransomes Matador 71, Safety And Operation Manual

Page: 19 / 144

GB-17
GB
MAINTENANCE
Read the safety instructions
Should the number of working hours that the machine
is in use during the indicated period exceed the number
quoted in brackets then use the recommended ‘working
hour’ guide as the maintenance schedule.
Daily (Every 8 working hours)
Cooling fins and Air intake
(Fig. 12 and Fig. 13)
Check to ensure the air intake (B) and cooling fins (A)
are kept free of
grass clippings and debris. This is essential to allow
the free passage of air so that the cooling system
functions correctly. A blocked cooling system will
result in overheating and possible engine damage.
Clutch and Layshaft Cover
(Fig. 14)
Lift cover (A) by releasing quarter turn fasteners (B) and
pivoting upwards. Grass can then be cleared from the
clutch and layshaft area. When completed close cover
(A) and sucure with the quarter turn fasteners (B).
Weekly
Air cleaner (dual element type)
(Fig. 15)
Unhook the cover (A) and remove the filter (B) and
element (C) inside.
Blow compressed air inside the element and the outer
filter to blow off dust.
The element and the outer filter may be tapped lightly
to remove dust (easy cleaning method). Wipe off dust
from the air cleaner body and the plate (D).
Reassemble the parts in their original positions.
IMPORTANT: Dirt wears engines. Incorrect
maintenance of the air cleaner will cause
premature wear. Service more frequently if the
air cleaner is very dirty or if operating in dusty
conditions.
LANDROLL BRAKE
Check for wear on the brake rubber rollers and either
adjust the stop pin or replace the rollers as necessary.
Fig. 12
Fig. 13
Fig. 14
Fig. 15