GB-19
EC
Hydro
Midsize
ADJUSTMENTS
Speed Control Lever Friction
The speed control levers are held where set by
friction pads. If the setting will not hold, tighten nuts
E to increase friction on speed control levers.
Center nut tightens tracking movement between
individual levers.
End nut tightens movement of both levers for speed.
Both speed control levers should move together
when one lever is moved. If not, increase friction.
Do not overtighten–this will make tracking
adjustment difficult.
PARKING BRAKE - Apply parking brakes and open
the bypass valves on the hydraulic pumps. Try to
push the machine forward. If wheels rotate, adjust
brakes as follows.
TO ADJUST:
1. Remove the hairpin cotter A from the brake rod
at the brake lever as shown.
2. Slide the brake rod out of the brake lever and
turn the rod in or out of the brake swivel B as
needed.
NOTE: The brake should initially be adjusted so
that the brake rod extends through swivel B
32 mm as shown. If more brake pressure is
required adjust as necessary.
3. Reassemble brake rod to the brake lever using
hairpin A.
4. Apply parking brakes and try to push the ma-
chine forward. If wheels rotate, readjust brakes.
5. Close bypass valves on the hydraulic pumps.
Summary of Contents for EC Hydro Midsize 930325
Page 2: ...2001 Textron Inc All Rights Reserved...
Page 133: ......
