background image

08-2010

IMPORTANT MESSAGE

Thank you for purchasing this Schiller Grounds Care, Inc. product.  You have purchased a world class mowing 

product, one of the best designed and built anywhere.  

This machine comes with an Operation and Safety Manual and a separate Setup, Parts and Maintenance Manual. 

The useful life and good service you receive from this machine depends to a large extent on how well you read 

and understand these manuals. Treat your machine properly, lubricate and adjust it as instructed, and it will give 

you many years of reliable service.

Your safe use of this Schiller Grounds Care, Inc. product is one of our prime design objectives.  Many safety 

features are built in, but we also rely on your good sense and care to achieve accident-free operation.  For best 

protection, study the manuals thoroughly. Learn the proper operation of all controls. Observe all safety precau-

tions. Follow all instructions and warnings completely.  Do not remove or defeat any safety features.  Make sure 

those who operate this machine are as well informed and careful in its use as you are. 

See a Schiller Grounds Care, Inc. dealer for any service or parts needed.  Schiller Grounds Care, Inc. service 

ensures that you continue to receive  the best results possible from Schiller Grounds Care, Inc. products.  You 

can trust Schiller Grounds Care, Inc. replacement parts because they are manufactured with the same high 

precision and quality as the original parts.  

Schiller Grounds Care, Inc. designs and builds its equipment to serve many years in a safe and productive man-

ner.  For longest life, use this machine only as directed in the manuals, keep it in good repair and follow safety 

warnings and instructions.  You'll always be glad you did.

Schiller Grounds Care, Inc.

One Bob Cat Lane

Johnson Creek, WI 53038-0469

TABLE OF CONTENTS 

PAGE

SAFETY ............................................................................................................................................................4

LABELS .........................................................................................................................................................5-7

GENERAL INSTRUCTIONS .......................................................................................................................8-10

CONTROLS .............................................................................................................................................. 11, 12

MACHINE OPERATION ............................................................................................................................13-15

HEIGHT OF CUT .......................................................................................................................................16-18

BELT REPLACEMENT ...................................................................................................................................19

ADJUSTMENTS ........................................................................................................................................20-23

SPECIFICATIONS .....................................................................................................................................24-27

2006/42/EC These are the Original instructions verified by 

Schiller Grounds Care, Inc.

 

Summary of Contents for 36 HYDRO Z-CONTROL MID-16HP KAW SIDE DISCHARGE SELF PROPELLED WALK BEHIND MOWER





























Reviews: