17
Figure 13a -
Removing the air valve
7-When replacing, repairing and installing the Pilot Valve please follow the correct procedure exactly
as laid out.(See Figure 13b)
Figure 13b - Pilot valve repair.
8.0 PERIODIC MAINTENANCE
8.1 Cleaning and storage of the pump
Do not let your fluid dry in the pump or in the hoses. It may harm the pump. Clean the pump regularly
by pumping a suitable solvent for your fluid until the pump is cleaned. Make sure the fluids you are
using are compatible with your diaphragm material. If you are not going to use the pump for a long
period, clean the pump and relieve the pump pressure.
8.2 Tightening the screw connections
Inspect damage to the hoses before every use and change if necessary. Check all the screw
connections for tightness and seals against leak. Check the screw connections every two months and
re-tighten with proper torque. First tighten the fluid cover screws than the manifold screws.Tighten the
screws applying the proper torque from the torque chart.(Fig. 7)
8.3 D
aıly maıntenance
1-
Check the air filter and regulator.
2-
Check if there is water or moisture in the filter.
3-
Check the air pressure set value of the pressure regulator.
4-
After you finish work, clean the pump by pumping a suitable solvent for your fluid until the pump
is cleaned.
